Image #1.
 Specifications for model # NVS730AKC48000
Equipment |
|
---|
Blade Spindles |
Heavy Duty cast iron right-angle gearboxes. |
Drive Tires |
18 x 10.5-10 Multi-Trac® C/S. |
Tractor Frame |
Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs. |
Steering Control |
FeatherTouch hand-control drive levers, low-force constant speed lever. |
Front Caster Tires |
8 x 3.0-4 semi-pneumatic. |
Parking Brake |
Wet disc, internal in wheel motor. |
Seat |
Commercial grade high back contoured foam padded with hinged mounting. |
Electrical |
12-volt battery with 20-amp alternator. |
Power Components |
|
---|
Engine Brand |
Kohler® |
Engine Model |
ECH730 |
Engine Displacement |
747 |
Engine Series |
Command? EFI |
Engine Type |
Electronic Fuel Injected |
Engine Speed |
3,600 rpm |
Air Filter |
Heavy-duty canister air filtration |
Fuel Type |
Gas EFI |
Fuel Capacity |
7.5-gallon (28.4-L), pivoting tank for easier engine service. |
Fuel Indicator |
Translucent Visual |
Drive |
Hydro-Drive |
Drive Description |
New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors. |
Speed |
Infinitely variable speed selection from 0?7.0 mph (11.3 kmph) forward, 0?4.5 mph (7.2 kmph) reverse. |
Carb Compliant |
Yes |
Safety Package |
Operator Presence Controls (OPC) and drive system interlock. |
ROPS |
Optional 2-post foldable ROPS with seat belt and latch. |
PTO Engagement |
Lever-actuated clutching belt with 6" brake band. |
Drive Wheel Release |
Allows movement without engine running. |
Casters |
0.50" thick rear caster fork |
Decks |
|
---|
Width / Cutting Deck |
48" |
Deck Style |
Floating Deck |
Deck Style Description |
Full Floating rear discharge cutting deck w/heavy duty gear driven spindle assembly. Patented Fill Reduction baffles standard. |
Deck Construction |
7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports. |
Blade Tip Speed |
Approximately 18,500 fpm. |
Cutting Heights |
1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments . |
Blades |
2 Blades at 25" Length |
Bag Capacity |
9.5 bushel (76 gallons) |
Dimensions |
|
---|
Width |
49.2 in. (125.0 cm) |
Length |
94.5 in. (240.0 cm) |
Height |
51.2 in. (130.0 cm) |
Curb Weight |
1170 |
|